TPD Freigabe: 9.November 2017
Introducing the much anticipated CUBOID TAP furnished with Joyetech TAPTECTM technology. Joyetech creatively developed the TAP buttons, paired with the pressure-sensitive system and vibration motor. It is equipped with a 1.3 inch OLED display, allowing for easily monitor and modify with ease. CUBOID TAP is powered by dual replaceable 18650 cells with which you can fire it up to the ultra 228W. Featuring the charging balance system, it supports a 2.0A quick charge capability, providing a faster charging resolution. It is backed with upgradeable firmware and multiple functions such as clock, custom logo, preheat and reverse charging. With the new TAP buttons, the CUBOID TAP will redefine what you can expect out of your vaping.
Size: 28.0 x 41.0x 86.0mm
Output mode: Power/Clock/Temp (Ni, Ti, SS316)/TCR (M1/M2/M3)/USB Charge mode
Features: TAPTECTM, pressure-sensitive, vibration motor, 2A QC, power bank, preheat, custom logo, real-time clock
Output range: 1-228W
Depth of 510 pins applicable: 4.0-5.5mm
Resistance range: 0.05-1.5ohm under Temp/TCR mode;0.1-3.5ohm under Power/Clock mode
Temperature control: 100-315°C/ 200-600°F
Battery using: dual married high-rate 18650 cells (continues discharge current 25A)
Max charging current: 2.0A
Max output current: 50A
1x CUBOID TAP (no cell)
1x QC USB cable
1x Manual
1x Warranty card
1x Warning card
TAPTEC technology changes what matters
Pressure-sensitive capability applied
Vibrates once taps
228W with 50A maximum output current
Equalizing charge system
Innovative buck-boost technology
Quick charge system
Power bank for reverse charge
Onboard reverse polarity protection
Dual circuit protection
Applicable for various tanks
Upgradeable firmware
